The Brosketeers Chronicles - Recent changes [en]

Main Page

BitiusTitius — Mon, 27 Jul 2026 14:29:18 GMT

← Older revision		Revision as of 14:29, 27 July 2026
Line 1:		Line 1:
	~~<strong>MediaWiki has been installed~~.~~</strong>~~		The Brosketeers is the greatest friend group in the history of the world. I am a proud Brosketeers.

	~~Consult the [https://www~~.~~mediawiki~~.~~org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.~~		Est. Sept 21, 2018.

	~~== Getting started ==~~
	* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
	* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
	* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
	* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
	* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]

Nusantara

BitiusTitius — Mon, 27 Jul 2026 05:43:30 GMT

@@ Line 2: / Line 2: @@
 |common_name = Nusantara
 |conventional_long_name = Confederation of Nusantara
-|capital = [[Luwu]]
+|native_name            = {{lang|nu|Persekutuan Nusantara}}
 |demonym = Nusantaran
 }}

Module:Lang/data/iana languages

BitiusTitius — Mon, 27 Jul 2026 03:51:23 GMT

← Older revision		Revision as of 03:51, 27 July 2026
Line 119:		Line 119:
	["no"] = {"Norwegian"},		["no"] = {"Norwegian"},
	["nr"] = {"South Ndebele"},		["nr"] = {"South Ndebele"},
			["nu"] = {"Nusantaran"},
	["nv"] = {"Navajo", "Navaho"},		["nv"] = {"Navajo", "Navaho"},
	["ny"] = {"Chichewa", "Chewa", "Nyanja"},		["ny"] = {"Chichewa", "Chewa", "Nyanja"},

Module:ISO 3166/data/National

BitiusTitius — Mon, 27 Jul 2026 03:49:20 GMT

← Older revision		Revision as of 03:49, 27 July 2026
Line 174:		Line 174:
	["NP"] = {alpha3="NPL",numeric="524",name="Nepal"},		["NP"] = {alpha3="NPL",numeric="524",name="Nepal"},
	["NR"] = {alpha3="NRU",numeric="520",name="Nauru"},		["NR"] = {alpha3="NRU",numeric="520",name="Nauru"},
	["NU"] = {alpha3="~~NIU~~",numeric="570",name="~~Niue~~"},		["NU"] = {alpha3="NUS",numeric="570",name="Nusantara"},
	["NZ"] = {alpha3="NZL",numeric="554",name="New Zealand",altnames={"Aotearoa"}},		["NZ"] = {alpha3="NZL",numeric="554",name="New Zealand",altnames={"Aotearoa"}},
	["OM"] = {alpha3="OMN",numeric="512",name="Oman"},		["OM"] = {alpha3="OMN",numeric="512",name="Oman"},

Nusantara

BitiusTitius — Mon, 27 Jul 2026 03:43:00 GMT

Created page with "{{Infobox country |common_name = Nusantara |conventional_long_name = Confederation of Nusantara |capital = Luwu |demonym = Nusantaran }}"

New page

{{Infobox country
|common_name = Nusantara
|conventional_long_name = Confederation of Nusantara
|capital = [[Luwu]]
|demonym = Nusantaran
}}

MediaWiki:Common.css

BitiusTitius — Mon, 27 Jul 2026 03:38:33 GMT

← Older revision		Revision as of 03:38, 27 July 2026
(One intermediate revision by the same user not shown)
Line 7:		Line 7:
	dfn {		dfn {
	font-style: inherit;		font-style: inherit;
			}

			:root {
			--background-color-neutral-subtle: #f8f9fa;
			--border-color-base: #a2a9b1;
			--color-base: #202122;
	}		}

Line 265:		Line 271:
	}		}

	~~@media screen {~~		.infobox {
	.infobox {		background-color: var(--background-color-neutral-subtle, #f8f9fa);
	background-color: var(--background-color-neutral-subtle, #f8f9fa);
	}
	}		}

MediaWiki:Vector.css

BitiusTitius — Mon, 27 Jul 2026 02:46:39 GMT

BitiusTitius imported MediaWiki:Vector.css by file upload (1 revision)

New page

/* Don't display some stuff on the main page */
.page-Main_Page #deleteconfirm,
.page-Main_Page #t-cite,
.page-Main_Page #footer-info-lastmod,
.action-view.page-Main_Page #siteSub,
.action-view.page-Main_Page #contentSub,
.action-view.page-Main_Page #contentSub2 {
display: none !important;
}

#coordinates {
position: absolute;
top: 3.5em;
right: 0;
line-height: 1.6;
text-align: right;
font-size: 92%;
white-space: nowrap;
float: right;
margin: 0;
padding: 0;
text-indent: 0;
text-transform: none;
}

/* correct position for VE */
.ve-ce-surface #coordinates {
margin-right: 2em;
margin-top: -1em;
}

/* FR topicon position */
div.flaggedrevs_short {
position: absolute;
top: -3em;
right: 100px;
z-index: 1;
}

/* Make "From Wikipedia, the free encyclopedia" a bit smaller */
#siteSub {
font-size: 92%;
}

/* Move page status indicators down slightly */
.mw-indicators {
padding-top: 0.4em;
}

/* Override [[phab:T265947]] */
.mw-body-content blockquote {
border-left: none;
}

/* Styling for tags in changes pages */
.mw-tag-markers {
font-style: italic;
font-size: 90%;
}

Test

BitiusTitius — Sun, 26 Jul 2026 16:15:32 GMT

Created page with "{{Infobox |title = An amazing Infobox |header1 = It works! |label2 = Configured by |data2 = trog |label3 = Web |data3 = [https://trog.qgl.org trog.qgl.org] }}"

New page

{{Infobox
|title = An amazing Infobox
|header1 = It works!
|label2 = Configured by
|data2 = trog
|label3 = Web
|data3 = [https://trog.qgl.org trog.qgl.org]
}}

MediaWiki:Vector.css

BitiusTitius — Sun, 26 Jul 2026 16:04:16 GMT

Created page with "Don't display some stuff on the main page: .page-Main_Page #deleteconfirm, .page-Main_Page #t-cite, .page-Main_Page #footer-info-lastmod, .action-view.page-Main_Page #siteSub, .action-view.page-Main_Page #contentSub, .action-view.page-Main_Page #contentSub2 { display: none !important; } #coordinates { position: absolute; top: 3.5em; right: 0; line-height: 1.6; text-align: right; font-size: 92%; white-space: nowrap; float: right; margin: 0; padding: 0; t..."

← Older revision		Revision as of 16:04, 26 July 2026
(No difference)

Makima

BitiusTitius — Sun, 26 Jul 2026 14:38:43 GMT

Created page with "I love her so much"

New page

I love her so much

Akane Kurokawa

BitiusTitius — Sun, 26 Jul 2026 14:21:32 GMT

Created page with "Heart"

New page

Heart

Undid revision 1364216074 by Hike395 (talk) please fix those in those places. Navbox is much more widely used.

New page

/* {{pp|small=y}} */
.navbox {
box-sizing: border-box;
border: 1px solid #a2a9b1;
width: 100%;
clear: both;
font-size: 88%;
text-align: center;
padding: 1px;
margin: 1em auto 0; /* Prevent preceding content from clinging to navboxes */
}

.navbox .navbox {
margin-top: 0; /* No top margin for nested navboxes */
}

.navbox + .navbox-styles + .navbox,
/* category positions are wrapped in an "empty" span in Parsoid [[phab:T378906]] */
.navbox + span.mw-empty-elt + .navbox-styles + .navbox {
margin-top: -1px; /* Single pixel border between adjacent navboxes */
}

.navbox-inner,
.navbox-subgroup {
width: 100%;
}

.navbox-group,
.navbox-title,
.navbox-abovebelow {
padding: 0.25em 1em;
line-height: 1.5em;
text-align: center;
}

.navbox-group {
white-space: nowrap;
/* @noflip */
text-align: right;
}

.navbox,
.navbox-subgroup {
background-color: #fdfdfd;
color:inherit;
}

.navbox-list {
line-height: 1.5em;
border-color: #fdfdfd; /* Must match background color */
}

.navbox-list-with-group {
text-align: left;
border-left-width: 2px;
border-left-style: solid;
}

/* cell spacing for navbox cells */
/* Borders above 2nd, 3rd, etc. rows */
/* TODO: figure out how to replace tr as structure;
* with div structure it should be just a matter of first-child */
tr + tr > .navbox-abovebelow,
tr + tr > .navbox-group,
tr + tr > .navbox-image,
tr + tr > .navbox-list {
border-top: 2px solid #fdfdfd; /* Must match background color */
}

.navbox-title {
background-color: #ccf; /* Level 1 color */
color:inherit;
}

.navbox-abovebelow,
.navbox-group,
.navbox-subgroup .navbox-title {
background-color: #ddf; /* Level 2 color */
color:inherit;
}

.navbox-subgroup .navbox-group,
.navbox-subgroup .navbox-abovebelow {
background-color: #e6e6ff; /* Level 3 color */
color:inherit;
}

.navbox-even {
background-color: #f7f7f7;
color:inherit;
}

.navbox-odd {
background-color: transparent;
color:inherit;
}

/* TODO: figure out how to remove reliance on td as structure */
.navbox .hlist td dl,
.navbox .hlist td ol,
.navbox .hlist td ul,
.navbox td.hlist dl,
.navbox td.hlist ol,
.navbox td.hlist ul {
padding: 0.125em 0;
}

.navbox .navbar {
display: block;
font-size: 100%;
}

.navbox-title .navbar {
/* @noflip */
float: left;
/* @noflip */
text-align: left;
/* @noflip */
margin-right: 0.5em;
}

/** T367463 */
body.skin--responsive .navbox-image img {
max-width: none !important;
}

@media print {
body.ns-0 .navbox {
display: none !important;
}
}

imported>Neveselbert — Wed, 08 Jul 2026 07:09:55 GMT

New page

/* {{pp|small=y}} */
/*
* This TemplateStyles sheet deliberately does NOT include the full set of
* infobox styles. We are still working to migrate all of the manual
* infoboxes. See [[MediaWiki talk:Common.css/to do#Infobox]]
* DO NOT ADD THEM HERE
*/
/*
* not strictly certain these styles are necessary since the modules now
* exclusively output infobox-subbox or infobox, not both
* just replicating the module faithfully
*/
.infobox-subbox {
padding: 0;
border: none;
margin: -3px;
width: auto;
min-width: 100%;
font-size: 100%;
clear: none;
float: none;
background-color: transparent;
}

.infobox-3cols-child {
margin: auto;
}

.infobox .navbar {
font-size: 100%;
}

/* Dark theme: [[William_Wragg]], [[Coral_Castle]] */

@media screen {
html.skin-theme-clientpref-night .infobox-full-data:not(.notheme) > div:not(.notheme)[style] {
background: #1f1f23 !important;
/* switch with var( --color-base ) when supported. */
color: #f8f9fa;
}
}

@media screen and ( prefers-color-scheme: dark) {
html.skin-theme-clientpref-os .infobox-full-data:not(.notheme) div:not(.notheme) {
background: #1f1f23 !important;
/* switch with var( --color-base ) when supported. */
color: #f8f9fa;
}
}

/* Since infobox is a table, many infobox templates take advantage of this to add columns and rows to the infobox itself rather than as part of a new table inside them. This class should be discouraged and removed on the long term, but allows us to at least identify these tables going forward
Currently in use on: [[Module:Infobox3cols]]
Fixes issue described in https://phabricator.wikimedia.org/F55300125 on Vector 2022.
*/
@media (min-width: 640px) {
body.skin--responsive .infobox-table {
display: table !important;
}
body.skin--responsive .infobox-table > caption {
display: table-caption !important;
}
body.skin--responsive .infobox-table > tbody {
display: table-row-group;
}
body.skin--responsive .infobox-table tr {
display: table-row !important;
}
body.skin--responsive .infobox-table th,
body.skin--responsive .infobox-table td {
padding-left: inherit;
padding-right: inherit;
}
}

imported>Ahecht — Wed, 01 Jul 2026 16:41:23 GMT

Thoughts on implementing text2coord to allow coordinates entered as a single parameter?: Reply

Show changes

Module:Coordinates

imported>Ahecht — Wed, 01 Jul 2026 16:40:59 GMT

Copy from sandbox. Implement parsing of coordinates from a single parameter. Feel free to roll back if there are unintended consequences.

New page

--[[
This module is intended to replace the functionality of {{Coord}} and related
templates. It provides several methods, including

{{#invoke:Coordinates | coord }} : General function formatting and displaying
coordinate values.

{{#invoke:Coordinates | dec2dms }} : Simple function for converting decimal
degree values to DMS format.

{{#invoke:Coordinates | dms2dec }} : Simple function for converting DMS format
to decimal degree format.

{{#invoke:Coordinates | link }} : Export the link used to reach the tools

]]

require('strict')

local math_mod = require("Module:Math")
local coordinates = {};
local isSandbox = mw.getCurrentFrame():getTitle():find('sandbox', 1, true);

local current_page = mw.title.getCurrentTitle()
local page_name = mw.uri.encode( current_page.prefixedText, 'WIKI' );
local coord_link = 'https://geohack.toolforge.org/geohack.php?pagename=' .. page_name .. '&params='

--[[ Helper function, replacement for {{coord/display/title}} ]]
local function displaytitle(coords)
return mw.getCurrentFrame():extensionTag{
name = 'indicator',
args = { name = 'coordinates' },
content = '[[Geographic coordinate system|Coordinates]]: ' .. coords .. ''
}
end

--[[ Helper function, used in detecting DMS formatting ]]
local function dmsTest(first, second)
if type(first) ~= 'string' or type(second) ~= 'string' then
return nil
end
local s = (first .. second):upper()
return s:find('^[NS][EW]$') or s:find('^[EW][NS]$')
end

--[[ Wrapper function to grab args, see Module:Arguments for this function's documentation. ]]
local function makeInvokeFunc(funcName)
return function (frame)
local args = require('Module:Arguments').getArgs(frame, {
wrappers = 'Template:Coord'
})
return coordinates[funcName](args, frame)
end
end

--[[ Helper function, handle optional args. ]]
local function optionalArg(arg, supplement)
return arg and arg .. supplement or ''
end

--[[
Formats any error messages generated for display
]]
local function errorPrinter(errors)
local result = ""
for i,v in ipairs(errors) do
result = result .. 'Coordinates: ' .. v[2] .. ' '
end
return result
end

--[[
Determine the required CSS class to display coordinates

Usually geo-nondefault is hidden by CSS, unless a user has overridden this for himself
default is the mode as specificied by the user when calling the {{coord}} template
mode is the display mode (dec or dms) that we will need to determine the css class for
]]
local function displayDefault(default, mode)
if default == "" then
default = "dec"
end

if default == mode then
return "geo-default"
else
return "geo-nondefault"
end
end

--[[
specPrinter

Output formatter. Takes the structure generated by either parseDec
or parseDMS and formats it for inclusion on Wikipedia.
]]
local function specPrinter(args, coordinateSpec)
local uriComponents = coordinateSpec["param"]
if uriComponents == "" then
-- RETURN error, should never be empty or nil
return "ERROR param was empty"
end
if args["name"] then
uriComponents = uriComponents .. "&title=" .. mw.uri.encode(coordinateSpec["name"])
end

local geodmshtml = ''
.. '' .. coordinateSpec["dms-lat"] .. ' '
.. '' ..coordinateSpec["dms-long"] .. ''
.. ''

local lat = tonumber( coordinateSpec["dec-lat"] ) or 0
local geodeclat
if lat < 0 then
-- FIXME this breaks the pre-existing precision
geodeclat = tostring(coordinateSpec["dec-lat"]):sub(2) .. "°S"
else
geodeclat = (coordinateSpec["dec-lat"] or 0) .. "°N"
end

local long = tonumber( coordinateSpec["dec-long"] ) or 0
local geodeclong
if long < 0 then
-- FIXME does not handle unicode minus
geodeclong = tostring(coordinateSpec["dec-long"]):sub(2) .. "°W"
else
geodeclong = (coordinateSpec["dec-long"] or 0) .. "°E"
end

local geodechtml = ''
.. geodeclat .. ' '
.. geodeclong
.. ''

local geonumhtml = ''
.. coordinateSpec["dec-lat"] .. '; '
.. coordinateSpec["dec-long"]
.. ''

local inner = '' .. geodmshtml .. ''
.. ' / '
.. '';

if not args["name"] then
inner = inner .. geodechtml
.. ' / ' .. geonumhtml .. ''
else
inner = inner .. '' .. geodechtml
.. ' / ' .. geonumhtml .. ''
.. ' ('
.. args["name"] .. ')'
end

local stylesheetLink = 'Module:Coordinates' .. ( isSandbox and '/sandbox' or '' ) .. '/styles.css'
return mw.getCurrentFrame():extensionTag{
name = 'templatestyles', args = { src = stylesheetLink }
} .. '[' .. coord_link .. uriComponents ..
' ' .. inner .. ']' .. '[[Category:Pages using gadget WikiMiniAtlas]]'
end

--[[ Helper function, convert decimal to degrees ]]
local function convert_dec2dms_d(coordinate)
local d = math_mod._round( coordinate, 0 ) .. "°"
return d .. ""
end

--[[ Helper function, convert decimal to degrees and minutes ]]
local function convert_dec2dms_dm(coordinate)
coordinate = math_mod._round( coordinate * 60, 0 );
local m = coordinate % 60;
coordinate = math.floor( (coordinate - m) / 60 );
local d = coordinate % 360 .."°"

return d .. string.format( "%02d′", m )
end

--[[ Helper function, convert decimal to degrees, minutes, and seconds ]]
local function convert_dec2dms_dms(coordinate)
coordinate = math_mod._round( coordinate * 60 * 60, 0 );
local s = coordinate % 60
coordinate = math.floor( (coordinate - s) / 60 );
local m = coordinate % 60
coordinate = math.floor( (coordinate - m) / 60 );
local d = coordinate % 360 .."°"

return d .. string.format( "%02d′", m ) .. string.format( "%02d″", s )
end

--[[
Helper function, convert decimal latitude or longitude to
degrees, minutes, and seconds format based on the specified precision.
]]
local function convert_dec2dms(coordinate, firstPostfix, secondPostfix, precision)
local coord = tonumber(coordinate)
local postfix
if coord >= 0 then
postfix = firstPostfix
else
postfix = secondPostfix
end

precision = precision:lower();
if precision == "dms" then
return convert_dec2dms_dms( math.abs( coord ) ) .. postfix;
elseif precision == "dm" then
return convert_dec2dms_dm( math.abs( coord ) ) .. postfix;
elseif precision == "d" then
return convert_dec2dms_d( math.abs( coord ) ) .. postfix;
end
end

--[[
Convert DMS format into a N or E decimal coordinate
]]
local function convert_dms2dec(direction, degrees_str, minutes_str, seconds_str)
local degrees = tonumber(degrees_str)
local minutes = tonumber(minutes_str) or 0
local seconds = tonumber(seconds_str) or 0

local factor = 1
if direction == "S" or direction == "W" then
factor = -1
end

local precision = 0
if seconds_str then
precision = 5 + math.max( math_mod._precision(seconds_str), 0 );
elseif minutes_str and minutes_str ~= '' then
precision = 3 + math.max( math_mod._precision(minutes_str), 0 );
else
precision = math.max( math_mod._precision(degrees_str), 0 );
end

local decimal = factor * (degrees+(minutes+seconds/60)/60)
return string.format( "%." .. precision .. "f", decimal ) -- not tonumber since this whole thing is string based.
end

--[[
Checks input values to for out of range errors.
]]
local function validate( lat_d, lat_m, lat_s, long_d, long_m, long_s, source, strong )
local errors = {};
lat_d = tonumber( lat_d ) or 0;
lat_m = tonumber( lat_m ) or 0;
lat_s = tonumber( lat_s ) or 0;
long_d = tonumber( long_d ) or 0;
long_m = tonumber( long_m ) or 0;
long_s = tonumber( long_s ) or 0;

if strong then
if lat_d < 0 then
table.insert(errors, {source, "latitude degrees < 0 with hemisphere flag"})
end
if long_d < 0 then
table.insert(errors, {source, "longitude degrees < 0 with hemisphere flag"})
end
--[[
#coordinates is inconsistent about whether this is an error. If globe: is
specified, it won't error on this condition, but otherwise it will.

For not simply disable this check.

if long_d > 180 then
table.insert(errors, {source, "longitude degrees > 180 with hemisphere flag"})
end
]]
end

if lat_d > 90 then
table.insert(errors, {source, "latitude degrees > 90"})
end
if lat_d < -90 then
table.insert(errors, {source, "latitude degrees < -90"})
end
if lat_m >= 60 then
table.insert(errors, {source, "latitude minutes >= 60"})
end
if lat_m < 0 then
table.insert(errors, {source, "latitude minutes < 0"})
end
if lat_s >= 60 then
table.insert(errors, {source, "latitude seconds >= 60"})
end
if lat_s < 0 then
table.insert(errors, {source, "latitude seconds < 0"})
end
if long_d >= 360 then
table.insert(errors, {source, "longitude degrees >= 360"})
end
if long_d <= -360 then
table.insert(errors, {source, "longitude degrees <= -360"})
end
if long_m >= 60 then
table.insert(errors, {source, "longitude minutes >= 60"})
end
if long_m < 0 then
table.insert(errors, {source, "longitude minutes < 0"})
end
if long_s >= 60 then
table.insert(errors, {source, "longitude seconds >= 60"})
end
if long_s < 0 then
table.insert(errors, {source, "longitude seconds < 0"})
end

return errors;
end

--[[
parseDec

Transforms decimal format latitude and longitude into the
structure to be used in displaying coordinates
]]
local function parseDec( lat, long, format )
local coordinateSpec = {}
local errors = {}

if not long then
return nil, {{"parseDec", "Missing longitude"}}
elseif not tonumber(long) then
return nil, {{"parseDec", "Longitude could not be parsed as a number: " .. long}}
end

errors = validate( lat, nil, nil, long, nil, nil, 'parseDec', false );
coordinateSpec["dec-lat"] = lat;
coordinateSpec["dec-long"] = long;

local mode = coordinates.determineMode( lat, long );
coordinateSpec["dms-lat"] = convert_dec2dms( lat, "N", "S", mode) -- {{coord/dec2dms|{{{1}}}|N|S|{{coord/prec dec|{{{1}}}|{{{2}}}}}}}
coordinateSpec["dms-long"] = convert_dec2dms( long, "E", "W", mode) -- {{coord/dec2dms|{{{2}}}|E|W|{{coord/prec dec|{{{1}}}|{{{2}}}}}}}

if format then
coordinateSpec.default = format
else
coordinateSpec.default = "dec"
end

return coordinateSpec, errors
end

--[[
parseDMS

Transforms degrees, minutes, seconds format latitude and longitude
into the a structure to be used in displaying coordinates
]]
local function parseDMS( lat_d, lat_m, lat_s, lat_f, long_d, long_m, long_s, long_f, format )
local coordinateSpec, errors, backward = {}, {}

lat_f = lat_f:upper();
long_f = long_f:upper();

-- Check if specified backward
if lat_f == 'E' or lat_f == 'W' then
lat_d, long_d, lat_m, long_m, lat_s, long_s, lat_f, long_f, backward = long_d, lat_d, long_m, lat_m, long_s, lat_s, long_f, lat_f, true;
end

errors = validate( lat_d, lat_m, lat_s, long_d, long_m, long_s, 'parseDMS', true );
if not long_d then
return nil, {{"parseDMS", "Missing longitude" }}
elseif not tonumber(long_d) then
return nil, {{"parseDMS", "Longitude could not be parsed as a number:" .. long_d }}
end

if not lat_m and not lat_s and not long_m and not long_s and #errors == 0 then
if math_mod._precision( lat_d ) > 0 or math_mod._precision( long_d ) > 0 then
if lat_f:upper() == 'S' then
lat_d = '-' .. lat_d;
end
if long_f:upper() == 'W' then
long_d = '-' .. long_d;
end

return parseDec( lat_d, long_d, format );
end
end

coordinateSpec["dms-lat"] = lat_d.."°"..optionalArg(lat_m,"′") .. optionalArg(lat_s,"″") .. lat_f
coordinateSpec["dms-long"] = long_d.."°"..optionalArg(long_m,"′") .. optionalArg(long_s,"″") .. long_f
coordinateSpec["dec-lat"] = convert_dms2dec(lat_f, lat_d, lat_m, lat_s) -- {{coord/dms2dec|{{{4}}}|{{{1}}}|0{{{2}}}|0{{{3}}}}}
coordinateSpec["dec-long"] = convert_dms2dec(long_f, long_d, long_m, long_s) -- {{coord/dms2dec|{{{8}}}|{{{5}}}|0{{{6}}}|0{{{7}}}}}

if format then
coordinateSpec.default = format
else
coordinateSpec.default = "dms"
end

return coordinateSpec, errors, backward
end

--[[
Check the input arguments for coord to determine the kind of data being provided
and then make the necessary processing.
]]
local function formatTest(args)
local result, errors
local backward, primary = false, false

local function getParam(args, lim)
local ret = {}
for i = 1, lim do
ret[i] = args[i] or ''
end
return table.concat(ret, '_')
end

if not args[1] then
-- no lat logic
return errorPrinter( {{"formatTest", "Missing latitude"}} )
elseif not tonumber(args[1]) then
-- bad lat logic
return errorPrinter( {{"formatTest", "Unable to parse latitude as a number:" .. args[1]}} )
elseif not args[4] and not args[5] and not args[6] then
-- dec logic
result, errors = parseDec(args[1], args[2], args.format)
if not result then
return errorPrinter(errors);
end
-- formatting for geohack: geohack expects D_N_D_E notation or D;D notation
-- wikiminiatlas doesn't support D;D notation
-- #coordinates parserfunction doesn't support negative decimals with NSWE
result.param = table.concat({
math.abs(tonumber(args[1])),
((tonumber(args[1]) or 0) < 0) and 'S' or 'N',
math.abs(tonumber(args[2])),
((tonumber(args[2]) or 0) < 0) and 'W' or 'E',
args[3] or ''}, '_')
elseif dmsTest(args[4], args[8]) then
-- dms logic
result, errors, backward = parseDMS(args[1], args[2], args[3], args[4],
args[5], args[6], args[7], args[8], args.format)
if args[10] then
table.insert(errors, {'formatTest', 'Extra unexpected parameters'})
end
if not result then
return errorPrinter(errors)
end
result.param = getParam(args, 9)
elseif dmsTest(args[3], args[6]) then
-- dm logic
result, errors, backward = parseDMS(args[1], args[2], nil, args[3],
args[4], args[5], nil, args[6], args['format'])
if args[8] then
table.insert(errors, {'formatTest', 'Extra unexpected parameters'})
end
if not result then
return errorPrinter(errors)
end
result.param = getParam(args, 7)
elseif dmsTest(args[2], args[4]) then
-- d logic
result, errors, backward = parseDMS(args[1], nil, nil, args[2],
args[3], nil, nil, args[4], args.format)
if args[6] then
table.insert(errors, {'formatTest', 'Extra unexpected parameters'})
end
if not result then
return errorPrinter(errors)
end
result.param = getParam(args, 5)
else
-- Error
return errorPrinter({{"formatTest", "Unknown argument format"}}) .. '[[Category:Pages with malformed coordinate tags]]'
end
result.name = args.name

local extra_param = {'dim', 'globe', 'scale', 'region', 'source', 'type'}
for _, v in ipairs(extra_param) do
if args[v] then
table.insert(errors, {'formatTest', 'Parameter: "' .. v .. '=" should be "' .. v .. ':"' })
end
end

local ret = specPrinter(args, result)
if #errors > 0 then
ret = ret .. ' ' .. errorPrinter(errors) .. '[[Category:Pages with malformed coordinate tags]]'
end
return ret, backward
end

--[[
Generate Wikidata tracking categories.
]]
local function makeWikidataCategories(qid)
local ret
local qid = qid or mw.wikibase.getEntityIdForCurrentPage()
if mw.wikibase and current_page.namespace == 0 then
if qid and mw.wikibase.entityExists(qid) and mw.wikibase.getBestStatements(qid, "P625") and mw.wikibase.getBestStatements(qid, "P625")[1] then
local snaktype = mw.wikibase.getBestStatements(qid, "P625")[1].mainsnak.snaktype
if snaktype == 'value' then
-- coordinates exist both here and on Wikidata, and can be compared.
ret = 'Coordinates on Wikidata'
elseif snaktype == 'somevalue' then
ret = 'Coordinates on Wikidata set to unknown value'
elseif snaktype == 'novalue' then
ret = 'Coordinates on Wikidata set to no value'
end
else
-- We have to either import the coordinates to Wikidata or remove them here.
ret = 'Coordinates not on Wikidata'
end
end
if ret then
return string.format('[[Category:%s]]', ret)
else
return ''
end
end

--[[
Parse coordinates entered as a single string
]]

local function text2coord(text)
if type(text) ~= 'string' then return end

local coords = {}
local numTerms = 0
local parts

local function assign(k, number, start, pos)
if number then
coords[start + pos - 1] = number
if k == 1 then
numTerms = pos
elseif numTerms < pos then -- more terms in long than lat
return false
end
elseif numTerms >= pos then -- more terms in lat than long
return false
end
return true
end

text = mw.ustring.gsub(mw.text.trim(text:uupper()), "[*′″]", {['*'] = '°', ['′'] = "'", ['″'] = '"'})

for _, regex in ipairs({
"^([+%-%d.°'\"NS%s]+),%s*([+%-%d.°'\"EW%s]+)$", --split by commas
"^([+%-%d.°'\"%s]+[NS])%s*([+%-%d.°'\"%s]+[EW])$", --split by N/S
"^([+%-%d.°'%s]+\")%s*([+%-%d.°'%s]+\")$", --split by "
"^([+%-%d.°%s]+')%s*([+%-%d.°%s]+')$", --split by '
"^([+%-%d.%s]+°)%s*([+%-%d.%s]+°)$", --split by °
"^([+%-%d.]+)%s+([+%-%d.]+)$" --split by space
}) do
local lat, long = string.match(text, regex)
if lat and long then
parts = {mw.text.trim(lat), mw.text.trim(long)}
break
end
end

if not parts then return end

local SW = {"S", "W"}
local NE = {"N", "E"}
for k, v in ipairs(parts) do
local number
local start = k + numTerms
-- Find or create N, S, E, and W
local dir = v:match("([NSEW])$")
if dir then
v = v:sub(1,-2)
elseif v:sub(1,1) == '-' then
v = v:sub(2)
dir = SW[k]
else
dir = NE[k]
end

-- attempt to convert text to number
number = tonumber(v)
if number then
-- Single number, assign it to the position "start" in the "coords" array
if not assign(k, number, start, 1) then
return
end
-- attempt to convert dms to decimal
elseif string.match(v, "°") then
for pos, regex in ipairs({
"^%s*([+%-%d.]+)%s*°[^°]*$", --degrees
"^[^°']+°%s*([%d.]+)%s*'[^°']*$", --minutes
"^[^'\"]+'%s*([%d.]+)%s*\"[^'\"]*$" --seconds
}) do
-- Assign component to a position in the "coords" array determined
-- by "start" and "pos", and increment "numTerms" if this is latitude
if not assign(k, tonumber(string.match(v, regex)), start, pos) then
return
end
end
end
if coords[start] == nil then return end
coords[start + numTerms] = dir
end
return coords
end

--[[
link

Simple function to export the coordinates link for other uses.

Usage:
{{#invoke:Coordinates | link }}

]]
function coordinates.link(frame)
return coord_link;
end

--[[
dec2dms

Wrapper to allow templates to call dec2dms directly.

Usage:
{{#invoke:Coordinates | dec2dms | decimal_coordinate | positive_suffix |
negative_suffix | precision }}

decimal_coordinate is converted to DMS format. If positive, the positive_suffix
is appended (typical N or E), if negative, the negative suffix is appended. The
specified precision is one of 'D', 'DM', or 'DMS' to specify the level of detail
to use.
]]
coordinates.dec2dms = makeInvokeFunc('_dec2dms')
function coordinates._dec2dms(args)
local coordinate = args[1]
local firstPostfix = args[2] or ''
local secondPostfix = args[3] or ''
local precision = args[4] or ''

return convert_dec2dms(coordinate, firstPostfix, secondPostfix, precision)
end

--[[
Helper function to determine whether to use D, DM, or DMS
format depending on the precision of the decimal input.
]]
function coordinates.determineMode( value1, value2 )
local precision = math.max( math_mod._precision( value1 ), math_mod._precision( value2 ) );
if precision <= 0 then
return 'd'
elseif precision <= 2 then
return 'dm';
else
return 'dms';
end
end

--[[
dms2dec

Wrapper to allow templates to call dms2dec directly.

Usage:
{{#invoke:Coordinates | dms2dec | direction_flag | degrees |
minutes | seconds }}

Converts DMS values specified as degrees, minutes, seconds too decimal format.
direction_flag is one of N, S, E, W, and determines whether the output is
positive (i.e. N and E) or negative (i.e. S and W).
]]
coordinates.dms2dec = makeInvokeFunc('_dms2dec')
function coordinates._dms2dec(args)
local direction = args[1]
local degrees = args[2]
local minutes = args[3]
local seconds = args[4]

return convert_dms2dec(direction, degrees, minutes, seconds)
end

--[[
coord

Main entry point for Lua function to replace {{coord}}

Usage:
{{#invoke:Coordinates | coord }}
{{#invoke:Coordinates | coord | lat | long }}
{{#invoke:Coordinates | coord | lat | lat_flag | long | long_flag }}
...

Refer to {{coord}} documentation page for many additional parameters and
configuration options.

Note: This function provides the visual display elements of {{coord}}. In
order to load coordinates into the database, the {{#coordinates:}} parser
function must also be called, this is done automatically in the Lua
version of {{coord}}.
]]
coordinates.coord = makeInvokeFunc('_coord')
function coordinates._coord(args)
if not tonumber(args[1]) then
local parsed = text2coord(args[1])
if parsed then -- full lat/long entered as a single string
for i = 2, #args do args[#parsed + i - 1] = args[i] end
for i, v in ipairs(parsed) do args[i] = v end
elseif not args[2] then -- look for coordinates from wikidata
args[3] = args[1]; args[1] = nil
local entity = mw.wikibase.getEntityObject(args.qid)
if entity
and entity.claims
and entity.claims.P625
and entity.claims.P625[1].mainsnak.snaktype == 'value'
then
local precision = entity.claims.P625[1].mainsnak.datavalue.value.precision
args[1] = entity.claims.P625[1].mainsnak.datavalue.value.latitude
args[2] = entity.claims.P625[1].mainsnak.datavalue.value.longitude
if precision then
precision = -math_mod._round(math.log(precision)/math.log(10),0)
args[1] = math_mod._round(args[1],precision)
args[2] = math_mod._round(args[2],precision)
end
end
end
end

local contents, backward = formatTest(args)
local Notes = args.notes or ''
local Display = args.display and args.display:lower() or 'inline'

-- it and ti are short for inline,title and title,inline
local function isInline(s)
-- Finds whether coordinates are displayed inline.
return s:find('inline') ~= nil or s == 'i' or s == 'it' or s == 'ti'
end
local function isInTitle(s)
-- Finds whether coordinates are displayed in the title.
return s:find('title') ~= nil or s == 't' or s == 'it' or s == 'ti'
end

local function coord_wrapper(in_args)
-- Calls the parser function {{#coordinates:}}.
return mw.getCurrentFrame():callParserFunction('#coordinates', in_args) or ''
end

local text = ''
if isInline(Display) then
text = text .. '' .. contents .. Notes .. ''
end
if isInTitle(Display) then
-- Add to output since indicator content is invisible to Lua later on
if not isInline(Display) then
text = text .. '' .. contents .. Notes .. ''
end
text = text .. displaytitle(contents .. Notes) .. makeWikidataCategories(args.qid)
end
if not args.nosave then
local page_title, count = mw.title.getCurrentTitle(), 1
if backward then
local tmp = {}
while not string.find((args[count-1] or ''), '[EW]') do tmp[count] = (args[count] or ''); count = count+1 end
tmp.count = count; count = 2*(count-1)
while count >= tmp.count do table.insert(tmp, 1, (args[count] or '')); count = count-1 end
for i, v in ipairs(tmp) do args[i] = v end
else
while count <= 9 do args[count] = (args[count] or ''); count = count+1 end
end
if isInTitle(Display) and not page_title.isTalkPage and page_title.subpageText ~= 'doc' and page_title.subpageText ~= 'testcases' then args[10] = 'primary' end
args.notes, args.format, args.display = nil
text = text .. coord_wrapper(args)
end
return text
end

--[[
coord2text

Extracts a single value from a transclusion of {{Coord}}.
IF THE GEOHACK LINK SYNTAX CHANGES THIS FUNCTION MUST BE MODIFIED.

Usage:

{{#invoke:Coordinates | coord2text | {{Coord}} | parameter }}

Valid values for the second parameter are: lat (signed integer), long (signed integer), type, scale, dim, region, globe, source

]]
function coordinates._coord2text(coord,type)
if coord == '' or type == '' or not type then return nil end
type = mw.text.trim(type)
if type == 'lat' or type == 'long' then
local coordString = mw.ustring.match(coord,'[%.%d]+°[NS] [%.%d]+°[EW]')
if not coordString then
return nil
end
local result = mw.text.split(coordString, ' ')
local negative
if type == 'lat' then
result, negative = result[1], 'S'
else
result, negative = result[2], 'W'
end
if not result then
return nil
end
result = mw.text.split(result, '°')
if not result[1] then
return nil
end
if result[2] == negative then result[1] = '-'..result[1] end
return result[1]
else
return mw.ustring.match(coord, 'params=.-_' .. type .. ':(.-)[ _]')
end
end

function coordinates.coord2text(frame)
return coordinates._coord2text(frame.args[1],frame.args[2]) or ''
end

--[[
coordinsert

Injects some text into the Geohack link of a transclusion of {{Coord}} (if that text isn't already in the transclusion). Outputs the modified transclusion of {{Coord}}.
IF THE GEOHACK LINK SYNTAX CHANGES THIS FUNCTION MUST BE MODIFIED.

Usage:

{{#invoke:Coordinates | coordinsert | {{Coord}} | parameter:value | parameter:value | … }}

Do not make Geohack unhappy by inserting something which isn't mentioned in the {{Coord}} documentation.

]]
function coordinates.coordinsert(frame)
-- for the 2nd or later integer parameter (the first is the coord template, as above)
for i, v in ipairs(frame.args) do
if i ~= 1 then
-- if we cannot find in the coord_template the i_th coordinsert parameter e.g. region
if not mw.ustring.find(frame.args[1], (mw.ustring.match(frame.args[i], '^(.-:)') or '')) then
-- find from the params= up to the first possibly-present underscore
-- and append the i_th coordinsert parameter and a space
-- IDK why we're adding a space but it does seem somewhat convenient
frame.args[1] = mw.ustring.gsub(frame.args[1], '(params=.-)_? ', '%1_'..frame.args[i]..' ')
end
end
end
if frame.args.name then
-- if we can't find the vcard class
if not mw.ustring.find(frame.args[1], '') then
-- take something that looks like a coord template and add the vcard span with class and fn org class
local namestr = frame.args.name
frame.args[1] = mw.ustring.gsub(
frame.args[1],
'()(<span[^<>]*>[^<>]*<span[^<>]*>[^<>]*<span[^<>]*>[^<>]*)()',
'%1%2 (' .. namestr .. ')%3'
)
-- then find anything from coordinates parameters to the 'end' and attach the title parameter
frame.args[1] = mw.ustring.gsub(
frame.args[1],
'(&params=[^&"<>%[%] ]*) ',
'%1&title=' .. mw.uri.encode(namestr) .. ' '
)
end
end

-- replace the existing indicator with a new indicator using the modified content
frame.args[1] = mw.ustring.gsub(
frame.args[1],
'((.+))\127[^\127]*UNIQ%-%-indicator%-%x+%-%-?QINU[^\127]*\127',
function (inline, coord) return inline .. displaytitle(coord) end
)

return frame.args[1]
end

return coordinates